140g Used motor grader american
140g Used motor grader american
140g Used motor grader american
1997 CAT 140G
72V
EROPS cab
6900 hours on meter
14’ moldboard
Blade lift accumulators
14.00 X 24 tires
Good working order
| Engine |
| Make | |
| Power Measured @ | 2200 rpm |
| Net Power Gear 5-6 | 135 hp | 100.7 kw |
| Number of Cylinders | 6 |
| Max Power | 135 hp | 100.7 kw |
| Displacement | 640.7 cu in | 10.5 L |
| Operational |
| Std Operation Weight - Front Axle | 7870.5 lb | 3570 kg |
| Std Operation Weight - Rear Axle | 20128.2 lb | 9130 kg |
| Std Operation Weight - Total | 27998.7 lb | 12700 kg |
| Max Operation Weight - Front Axle | 9986.9 lb | 4530 kg |
| Max Operation Weight - Rear Axle | 21605.3 lb | 9800 kg |
| Max Operation Weight - Total | 31592.2 lb | 14330 kg |
| Fuel Capacity | 74.8 gal | 283 L |
| Oil System Fluid Capacity | 7.7 gal | 29 L |
| Cooling System Fluid Capacity | 12.4 gal | 47 L |
| Hydrauilc System Fluid Capacity | 20.1 gal | 76 L |
| Transmission Fluid Capacity | 23 gal | 87 L |
| Tandem Case Fluid Capacity (each) | 16.9 gal | 64 L |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 19 amps |
| Transmission |
| Type | Cat-built direct drive power shift |
| Number of Gears - Forward | 6 |
| Number of Gears - Reverse | 6 |
| Max Speed - Forward | 25.5 mph | 41 km/h |
| Max Speed - Reverse | 25.5 mph | 41 km/h |
| Steering |
| Articulation L/R | 50 degrees |
| Turning Radius | 24 ft in | 7.3 m |
| Front Axle |
| Wheel Lean | 18 degrees |
| Oscillation - Total | 32 degrees |
| Ground Clearance | 2 ft in | 610 mm |
| Hydraulic System |
| Pump Type | closed-center, constant-pressure system w/ variable displacement piston |
| Pump Flow | 51 gal/min | 193 L/min |
| Relief Valve Pressure | 2150 psi | 14823.7 kPa |
| Moldboard |
| Moldboard Width | 12 ft in | 3650 mm |
| Moldboard Height | 24 in | 610 mm |
| Moldboard Thickness | 0.87 in | 22 mm |
| Max Depth of Cut | 17.7 in | 450 mm |
| Side Shift Left | 26.4 in | 670 mm |
| Side Shift Right | 20.5 in | 520 mm |
