10 Inch Water Cooled Brushless DC Motor
| Motor Type | Brushless Direct Current Motor(BLDC Motor) |
| Axle Configuration | Double |
| Wheel Rim | 10 inch |
| Rated Speed | 40km/h |
| Voltage | 60V |
| Magnet Height | 27mm |
| RPM | 450-500 |
| Brake System | Drum Brake/Disc Brake |
| Hall Sensors | 1/2 |
| Hall Sensor Phasing | 120° |
| Number of motor phases | 3 |
| Max Efficiency | 93% |
| Rated Out Power | 500w |
| Number of Pole Pairs | 26 |
| Cross Section of Phase Wire | 2.5 square |
| Waterproof Grade | IP54 |
| Color | Black/white etc. |
| Package | Carton |

Notice:
Motor could work 120 ℃ in half an hour without damage.
Suggestion (Setting of Controller)
When it's 130 ℃ inside of motor (in 30s), the current should be limited 50%.
When it's 150 ℃, the controller shut down. When it drop down to 110℃, the controller work again.