The SA213 T11 Alloy Steel Boiler Membrane Wall Panel is engineered with φ42×5mm chromium-molybdenum alloy tubes for high-temperature superheater enclosure walls. The 1.25Cr-0.5Mo composition provides exceptional oxidation and creep resistance at temperatures up to 550°C, making it ideal for the most demanding boiler zones.

Manufactured from SA213 T11 seamless alloy steel tubes containing 1.25% Chromium and 0.5% Molybdenum. This ferritic alloy offers superior high-temperature strength and resistance to graphitization and oxidation compared to carbon steel. Membrane bars are fabricated from 15CrMo alloy steel for material compatibility. Tube-to-fin welding uses submerged arc welding (SAW) for deep penetration, supplemented by manual TIG welding at panel edges and corner joints.

• High-Temperature Performance: 1.25Cr-0.5Mo alloy maintains mechanical properties up to 550°C, suitable for superheater and reheater enclosure zones
• Oxidation Resistance: Chromium content forms a protective oxide layer, reducing tube wall thinning in high-temperature flue gas environments
• Creep Strength: Molybdenum addition significantly improves creep rupture strength under sustained thermal loading
• Precision Welding: Combined SAW + TIG welding process ensures full-penetration bonds with minimal heat-affected zone degradation
• Post-Weld Heat Treatment: Stress-relieved after fabrication to eliminate residual welding stresses per ASME PWHT requirements

Material certificates to EN 10204 3.1 standard. 100% volumetric NDE including ultrasonic testing of all tube butt welds. Hydrostatic testing at 1.5x design pressure. Positive material identification (PMI) verification on all alloy components.

Designed for superheater and reheater enclosure wall sections in subcritical and supercritical pulverized coal-fired power plants. Also suitable for fluidized bed boiler furnace zones requiring enhanced oxidation resistance.