Centrifugal fan blower backward curved centrifugal fan radial blower fan speed of fan frp centrifugal fan

First of all, we can take a look at the advantages of FRP material:

1, the first advantage of FRP material is the high quality of strength comparison of light, to know the relative density of FRP, in fact, only 1.5~2.0, if the FRP and carbon steel are compared, the density is only about 1/4 of carbon steel, but the tensile strength of FRP itself is close to carbon steel. It is precisely because of this excellent performance of FRP, so in our daily life, we can see the figure of this material.

2, the second advantage of FRP material is the corrosion resistance is particularly good, this material actually for the general concentration of acid or alkali and many kinds of oil substances, have a very good resistance. At present, FRP material is also slowly replacing some stainless steel materials and non-ferrous metal materials. Because of the good corrosion resistance of this material, we can also use FRP in some chemical anti-corrosion projects.

3, the thermal performance of FRP is particularly good, which is actually an advantage of FRP. The thermal conductivity of this material is relatively low. If it is at normal temperature, the thermal conductivity is only about 1.25~1.67, so this material is actually a very good thermal insulation material.

4, the plasticity of FRP material is relatively strong, usually we can design some structural products according to the actual needs. This is actually a very prominent performance of FRP. For example, we can use FRP to design some corrosion resistant fan products, or design some instantaneous high temperature fan products.

Key Features

• Impeller diameter: 90~3500 mm
• Speed of mainshaft: 560~2900 rpm
• Pressure range: 3000~25425 Pa
• Flow range: 1297~83305 m3/h
• Air Temperature: 20~1000 Celsius degree

• Material: Cast Iron, Carbon Steel, Stainless Steel.

• Efficiency: 80%-90%

Please advise us the USAGE and following Parameter.Our engineering Dept will recommend the most suitable product for you.