Technical Parameters
| Item | TDH-Q809 |
| Material | 304 Stainless Steel |
| Specification | 168*1060mm |
| Drive motor | DC 24V brush motor |
| Length of the arm | 450mm |
| Pass direction | one or bi-directional |
| Work environment | Indoor or Outdoor |
| Work temperature | -10°C~70°C |
| Relative humidity | ≤90%, no condensation |
| Time of opening/closing | 0.2S |
| Transit speed | 40 People/minute normal open , 25-30 people/minute normal close |
| Reset time after break down | 10s |
| Normal work life | 3000000 times |
| Communication interface | RS485 |
| Input interface | 12V pulse signal with pulse width >100ms, drive current >10mA |
Features&Function
| 1. |
Direction indicator |
| 2. |
Direction can be set as single-direction or bi-direction |
| 3. |
CNC stamping and laser drilling, presenting a novel and elegant appearance |
| 4. |
Rainproof housing, anti-corrosion coating iron or #304 stainless steel |
| 5. |
Dual-bearing device, keeping the gate in balance when there is external force. |
| 6. |
Innovative and unique mounting surface ensures simple and convenient installation for system integrator; |
| 7. |
Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed) |
| 8. |
The mechanism is equipped with an automatic regulated hydraulic buffer device. There is no noise and impact when running. |
| 9. |
Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
|