▋OEM / ODM Gray Vertical Bar Type Sharp Warrior Heavy-Duty Barrier Gate
This silver vertical bar type Sharp Warrior heavy-duty barrier gate features a tough vertical bar structure with a matte silver body, presenting a simple and high-end look. It is suitable for modern parks, high-end residential areas, commercial parking lots and other diverse scenarios. Made of thickened anti-corrosion profiles, it has a stable structure, excellent impact and wind resistance, and can withstand high-frequency use. The gate runs smoothly and quietly with adjustable opening and closing speed, supports multiple intelligent control modes, and is compatible with license plate recognition and remote management systems. Safe, reliable and easy to install, it is an optimal choice for intelligent access control.
▋Technical Specifications
| Product Model |
J-KZ401 |
| Device Name |
Defender Heavy duty Barrier Gate |
| power supply voltage |
DC24V |
| Landing speed |
3-6s adjustable |
| Maximum rod length |
Including a 5m chassis |
| Color Selection |
Silver/Grey |
| Protection level |
IP54 |
| rated power |
200w |
| service life |
≥ 3 million times |
| Rod material |
aluminum alloy |
| Operating Temperature |
-30°C-75°C |
| Chassis thickness |
2.0mm |
| spray thickness |
60-120um |
| Chassis decoration LED light |
|
| Box salt spray test time |
72 hours |
| Optional interface |
485, Bluetooth, TTL, TCP/IP, 4G, etc |
| Support accessories |
Infrared radiation, radar, ground sensing, traffic lights, sound and light alarms, etc |
| anti-smash |
Resistance rebound, delayed pole drop, fleet mode, etc |
| Remote control distance/encryption |
≥ 50m/Yes (open and unobstructed) |
| Accessories List |
2 * remote control, 2 * key, 4 * M10 × 150 screws, 6 * 16 × 150 expansion screws |
| Chassis dimensions |
1300×500×382mm |
| Box packaging size/weight |
1675×690×690mm/195KG |
▋Product Features
- Safety: Powered by 24V DC power supply, ensuring personal safety
- Adjustable speed: independent adjustment of lifting and lowering speed
- Stable operation: The movement adopts a DC brushless motor, which has a large output torque and small size. The speed can be adjusted arbitrarily
- through the controller. When the falling and lifting rods are in place, deceleration buffering is achieved, making the brake rod smoothly in place
- Quiet: The working noise is below 50db
- Material: The main body of the movement is made of aluminum alloy material, manufactured by die-casting technology, with reliable mechanical
- Supports RS232/RS485 serial communication
▋Product precautions
- When the product is running, please confirm that there are no obstacles blocking the running path;
- When the barrier gate is in operation, it is strictly prohibited to open the chassis door or cover to avoid accidents;
- At the time of leaving the factory, the internal wiring of this gate has been prepared, and generally, users are not allowed to make changes. They only
- need to connect the AC 220V power supply to the input terminal of the air switch;
- The chassis shell must be grounded and a leakage protection switch must be installed at the power end;
- The barrier gate must be operated with a hand crank when the power is off;
- When the product leaves the factory, the tension spring has been matched to a balanced state according to the length and weight of the brake rod. It is not allowed to increase or decrease the length and weight of the brake rod without authorization to avoid the danger of losing balance. If changes are required, professional personnel should be consulted for operation;