▋Weishi Series Straight Boom Parking Lot Barrier Gate JWS-D07
The Weishi Series Straight Boom Parking Lot Barrier Gate (JWS-D07) is made of new stainless steel material, featuring excellent corrosion resistance and heat resistance, which significantly extends the product's service life. It is equipped with two types of motion modes for selection, widely suitable for managing the entry and exit of various types of vehicles. A new high-brightness LED display is integrated into the appearance design, facilitating the display of entry and exit information.
▋Technical Specifications
| Product Model |
JWS-D07 |
| Device Name |
Weishi Series Straight Boom Parking Lot Barrier Gate JWS-D07
|
| power supply voltage |
DC24V |
| Landing speed |
2.5-6s adjustable, optional 0.3S/0.6S/1.2S |
| Maximum rod length |
6m straight pole, 6m fence railing, 6m bent arm pole |
| Color Selection |
pearl white |
| Protection level |
IP54 |
| rated power |
200w |
| service life |
≥ 3 million times |
| Rod material |
100mm × 45mm aluminum alloy material |
| Operating Temperature |
-30°C-75°C |
| Chassis thickness |
2.0mm |
| spray thickness |
60-120um |
| Chassis decoration LED light |
|
| Box salt spray test time |
72 hours |
| Optional interface |
485, Bluetooth, TTL, TCP/IP, 4G, etc |
| Support accessories |
Infrared radiation, radar, ground sensing, traffic lights, sound and light alarms, etc |
| anti-smash |
Resistance rebound, delayed pole drop, fleet mode, etc |
| Remote control distance/encryption |
≥ 50m/Yes (open and unobstructed) |
| Accessories List |
2 * Remote Control, 2 * Key, 2 * Head M10 × 70 Screw, 4 * 12 × 150 Expansion Screw |
| Chassis dimensions |
985*340*300mm |
| Box packaging size/weight |
1055×375×410mm/50KG |
▋Product Features
- Multiple protections: motor overcurrent, overload, short circuit protection, motor fault protection, power reverse protectionSupport external remote control input
- Support for open position, close position, and status relay output
- Supports RS232/RS485 serial communication
- Support opening counting function and unmanned automatic closing function
- Support high sensitivity anti smashing and rebound protection function
▋Product precautions
- The barrier gate must be operated with a hand crank when the power is off;
- When the product leaves the factory, the tension spring has been matched to a balanced state according to the length and weight of the brake rod. It is not allowed to increase or decrease the length and weight of the brake rod without authorization to avoid the danger of losing balance. If changes are required, professional personnel should be consulted for operation;
- Without installing the tension spring on the machine, it is strictly prohibited to remove the tension spring when the brake lever is in a horizontal position;
- When replacing or repairing the brake lever, it must be in the lifting position and in a power-off state. Remove the tension spring, and one person should hold the brake lever with their hand. The other person should use the hand wheel at the end of the hand cranked motor to lower the brake lever to a horizontal position before replacing it.