▋Eagle Eye Swing Turnstile Acrylic swing arm
The Eagle Eye Series Single-Core Acrylic Swing Arm Stainless Steel Swing Barrier is constructed with new stainless steel, boasting superior corrosion resistance and heat resistance that greatly prolongs its service life. It offers two selectable motion modes; the acrylic swing arm design integrates protection and transparent aesthetics, making it widely applicable for managing the entry and exit of all pedestrians, effectively preventing tailgating and unauthorized pedestrian access.
▋Technical Specifications
| Product Model |
W-TB201 |
| Device Name |
Eagle Eye Swing Turnstile Acrylic swing arm |
| Box material |
304D stainless steel |
| output power supply |
24V DC power |
| Operating Temperature |
-20 ℃ - 55 ℃ |
| Open signal |
Passive signal (relay dry contact signal) |
| Channel width |
Swing gate single pole length 300-700mm |
| input power |
AC220 ± 10% V, 50HZ; |
| drive motor |
24V DC motor |
| relative humidity |
Relative humidity ≤ 90%, non condensing |
| communication interface |
none |
| Traffic speed |
25-35 people/minute |
▋Product Features
- It has fault self checking and alarm prompt functions, making it convenient for users to maintain and use.
- Control signals, buttons, or remote controls output by any external control device can be connected to achieve one-way and two-way control passage.
-
It offers two selectable motion modes, which can be freely switched according to the pedestrian flow and control requirements of the venue, meeting the pedestrian management needs of different scenarios such as office buildings, industrial parks and communities.
- Light indication: High brightness traffic light status indicator, guiding traffic.
- Built with a new stainless steel body, it has excellent corrosion and heat resistance, greatly improving the service life of the equipment and adapting to long-term operation in multiple indoor and outdoor scenarios.
▋Product precautions
- Each online network cable needs to be tested, please do not connect the wrong line to avoid burning out fuses or control boards;
- The power on test can only be carried out after checking that the circuit connection is correct and there is no short circuit;
- After installing the equipment, it must pass the status check function test before it can be put into use.
- If there are any abnormal phenomena during the installation process, please contact the technical personnel immediately for resolution;