BSJ70L 165CFM (280m³/h) 50Hz 0.75kW 2Poles Mechanical Booster Pump,Roots Pump
Description :
Roots vacuum pumps ,which are also called Roots blowers,are rotary plunger type pumps where two symmetrically shaped impellors rotate in opposite directions inside the pump housing.
Characteristics:
- The use of oil-free intermediate seal, multiple sealed way to ensure the high clean vacuum environment in the rotor chamber.
- Advanced proceesing to ensure the good geometrical symmetry of the rotors,as well as low noise and long service life.
- Special shaft seal is used to achieve the long stable running without oil leakage.
- The BSJ-L series is made of all-aluminum alloy, heat sink, corrosion resistance, and efficient energy saving.The BSJ-LC series is made of cast iron. The unique liquid coupling method enables the pump to start directly under the atmosphere, which greatly reduces the time of pumping.
- Compact structure, light weight, and small volume.
Technical Parameter :
| Model | Units | BSJ70L |
| Pumping Rate | 50 Hz | m³h-1 / Lmin-1 | 280/4670 |
| 60 Hz | 330/55000 |
| Max Inlet Pressure | 50Hz | Pa | 1.2x103 |
| 60Hz | Pa | 9.3x102 |
| Ultimate Vacuum | Pa | 4×10-1 |
| Motor Power | kW(hp) | 0.75 (1) |
| Inlet | -- | VG80 |
| Outlet | -- | VF80 |
| Cooling Method | Water cooled |
| Oil Need | L | 0.8 |
| Ambient Temp. | ℃ | 5~40 |
| Vacuum Pump Oil | -- | BSO-46 |
Note: The value of 'Ultimate Pressure' in this sheet is measured by Pirani gauge when the Baosi special pump oil is used,and the value should be 4x10-3 if the Mcleod gauge is used.
The cooling water temperature of inlet port must be 5~30℃ When the temperature is too low, keep it in an environment that is not easy to condense.
Performance Curve:

Dimensions:


Applications
- Vacuum distillation
- Vacuum packaging
- Thin film coating
- Freez drying
- Electrical engineering
- Printing
- Surface treatment technique
- Wind Energy
- Ceramics and glasses
We provide you with individual support,we train you and we offer 24/7 service worldwide.