DRP-120-1 COUTANT LAMBDA Power Supply AC to DC Power Supplies

Product Details

Features:

1 or 3 phase

90% efficiency

High overload current

Rapid connection

EMC: EN55022/B, EN55011/B, VDE0160, EN61000-4-2, 3, 4, 5, 6, 11

Approvals: EN60950, UL1950, CSA950, UL508 listed

INPUT

AC input voltage range: 85-132/176-264VAC selectable by front panel switch

DC input voltage range: 240-375VDC

Input current: <1.3A (115V); <0.7A (230V): 60W <2.6A (115V); <1.4A (230V): 120W, 144W 3 x 0.5A

Inrush current: <25A at 575VAC (coldstart)

OUTPUT

Output voltage: DRP-60-1, DRP-120-1 24VDC +5%-1% fixed All other models 24-28VDC, adjustable via a potentiometer on the front panel. The pots are covered and outputs preset to 24VDC.

Noise suppression: Filtered

Voltage regulation: <2% over all

Ripple: DRP-60/120/144/480/720; 20 MHz bandwidth, 50Ω measurement

Moore News

METALLURGICAL INDUSTRY
Metallurgical Industry Capability

Blast furnace ironmaking is the use of iron-containing raw materials (sinter, pellet or iron ore), fuel (coke, coal powder, etc.) and other auxiliary materials (limestone, dolomite, manganese ore, etc.) The blast furnace is charged into a certain proportion, and hot air is blown into the blast furnace to help the coke burn, and the raw materials and fuel are lowered as the smelting process in the furnace progresses.
In the process of falling material and gas rising, heat transfer, reduction, melting and decarbonization occur successively to produce pig iron.
The impurities in the iron ore raw material are combined with the flux added to the furnace to form a slag, and the molten iron at the bottom of the furnace is intermittently discharged into the molten iron tank. Sent to the steel mill. At the same time, it produces blast furnace gas and slag two by-products. After blast furnace slag water quenching, all of them are used as raw materials for cement production.

More Products

Contact Us

miya@mvme.cn(Click)

Email: miya@mvme.cn

QQ: 2851195450

Tel: 86-18020776792

Skype: miyazheng52