Allen Bradley Modules 1203-CN1 1203CN1 ABB 1203 CN1 ControlNet Communication Module Free shipping

Product Description:

After starting RSLogix 5000 and either starting a new project or opening an existing project, make sure
that you are OFFLINE with the ControlLogix processor. I/O configuration is only available when offline.
If you have not already defined the contents of your ControlLogix chassis under your project's "I/O
Configuration" folder, you will need to define the ControlNet bridge module at a minimum. Use the right
mouse button to click on the "I/O Configuration" folder, then choose "New Module" from the pop-up menu.From the dialog box that appears, choose the ControlNet bridge of the type (1756-CNB or 1756-CNBR)and series that you are using. In the next screen, you will need to name the ControlNet bridge and
indicate its position in the ControlLogix chassis (slot 0 is the leftmost).After defining the ControlNet bridge, use the right mouse button to click on the ControlNet bridge under"I/O configuration", then choose "New Module" from the pop-up menu

Related Product Recommendation:

Product's Character:

For the requested packet interval, enter the number of milliseconds desired between each I/O message
between the ControlLogix processor and the 1203-CN1. The 1203-CN1 can handle a packet interval as
low as 5 milliseconds; therefore, make sure that this value is set to at least 5. Click the "Finish" button to
complete the configuration of the I/O connection in RSLogix 5000. At this point, download your configuration to the ControlLogix processor, then exit RSLogix 5000. To actually schedule the I/O, you will need to start RSNetWorx for ControlNet. Once RSNetWorx starts, go online to the ControlNet network containing the ControlLogix chassis and 1203-CN1 being configured. Turn on the "Enable Edits" check box, then save the network. This causes the I/O connection created in RSLogix 5000 to be scheduled in the ControlLogix processor. After a few seconds, the I/O LED on the ControlLogix processor and the module LED on the 1203-CN1 should stop blinking and remain green. If they do not, it could indicate a number of I/O-related problems

NEW THOMSON 8-1/2X3/4IN STEEL SHAFT D392457
NEW MARTIN S1219 14 1/2 5/8IN BORE SPUR GEAR D404298
NEW THREADED STEEL 23-1/2X1-3/8IN SHAFT D324967
NEW 11-1/2IN LENGTH 1-3/8IN OD ROLLER CONVEYOR D487215
NEW RA JONES 276849 STEEL KEYWAY SHAFT 14-3/4X1IN REPLACEMENT PART D296115
NEW 4X1-1/2IN COATED STEEL SHAFT D371774
NEW APV 727-P-411442 4V2 IMPELLER PIN D418438
NEW YSM12B15 3/8IN BORE STEEL MITER GEAR D484180
NEW LMI MILTON ROY 26751 1/2IN NPT INJECTION CHECK VALVE ASSEMBLY D482270
NEW ROLLER W/SLEEVE 11-1/2IN LONG CONVEYOR REPLACEMENT PART D342808
NEW BROWNING NCG1630 SPUR GEAR 3/4IN BORE D240963
NEW BROWNING NCG1628 STEEL CHANGE GEAR 3/4 IN BORE D434489
NEW SAFEWAY S71-4 QUICK DISCONNECT COUPLER NIPPLE 1/2IN NPT D497944
NEW 3/4IN SHAFT 8X2-1/4IN ROLLER CONVEYOR D403952
NEW 1-3/8 IN BORE 40 TOOTH STEEL SPUR GEAR D449832
NEW 9 PACKING GLAND FOR 2IN STEEL GLOBE VALVE D475137
NEW RA JONES 279380 STEEL 28-1/8X1IN KEYWAY DRIVE SHAFT REPLACEMENT PART D246811
NEW RA JONES 280710 STEEL SHAFT 5-3/8 IN LONG 1/2 IN OD D448668
NEW 2 IN TRI-CLAMP 3-WAY VALVE BODY STAINLESS REPLACEMENT PART D456988
NEW NORWOOD 27046-2 STEEL 6-1/2X3/8IN SHAFT REPLACEMENT PART D281827

The use of the product: