Brushless Motor Access Control Turnstiles Anti Pinch 550mm Width
Fingerprint Access Control Full Automatic Brush-Less Motor Sliding Barrier Gate Access Control System
Product Overview
Sliding barrier gate is a passage management equipment designed for pedestrian access control. It features fast opening, enhanced safety, and operational convenience, making it an ideal solution for high-frequency pedestrian access management. Widely used in airports, subway stations, stations, docks, scenic spots, parks, student dormitories, and corporate pedestrian passages. Can integrate with smart card systems to enable offline ticketing management and facilitate unattended personnel entry/exit management. Composed of a main box and movable wing board, it effectively blocks unauthorized access.
Technical Specifications
| Dimension | 1200*330*1000mm |
| Case Material | SS304 stainless steel, acrylic |
| Pass width | 550mm |
| SS304 Material thickness | 1.2mm |
| Passage direction | Single directional / Bi-directional |
| Passing rate | 30-40 persons/min |
| Communication interface | Dry contact |
| Opening method | ID / IC card verification, infrared induction, button |
| MCBF | 5 million times |
| Infrared sensor | 4 pairs |
| Power | 60-100w |
| Working temperature | -20ºC~75ºC (Low temperature type can be customized) |
| Working environment | Indoor |
| Working humidity | ≤90% (without condensation) |
| Power input | AC220±10% 50Hz |
| Mechanism | DC 24V Brushless motor, low noise |
| Protective function | Hall limit, clutch anti-collision, infrared anti-pinch, illegal intrusion infrared alarm |
Product Features
- Fault detection and alarm functions for easy use and maintenance
- Programmable running status with built-in keyboard on main board
- Mechanical anti-pinch function - stops automatically when meeting resistance and resets after delay
- Anti-breakthrough function with automatic locking until opening signal received
- Infrared photocell support for anti-pinch and reset functions
- Automatic reset function cancels user authority after preset time (default 5 seconds)
- Configurable as normally open or normally closed
- Compatible with various card readers: IC/ID card readers, bar codes, fingerprints (access controller needed)
- Direction setting for single-direction or bi-direction operation
- LED direction indicator
- Automatic opening during power failure and closing when power restored
- Alarm function for illegal intrusion and reverse intrusion detection