Dry Contact Relay Signal Control Interface Brushed Stainless Steel Anti-Breakthrough Function Swing Turnstile

PRODUCT ADVANTAGE

• Bi-directional;
• High quality at a cost effective price;
• Integration with any type of access control and ID systems;
• Low power consumption;
• Whisper quiet, low noise operation;
• Possibility of gate opener customization;
• Wide range of accessories;
• Complete supply set as a standard;
• Fail safe.

PRODUCT DESCRIPTION

Swing turnstile is designed to control pedestrians entering or exiting restricted areas, usually used of high pedestrian traffic flow in both directions.

The body is made of brushed stainless steel which is robust, rigid, anti-rust, waterproof and durable.

Sinomatic swing barriers have standard relay signal input interface, which can be integrated with any kind of third-party access control system (e.g.: RFID, Fingerprint and Biometric reader device).

It is ideal for both indoor and outdoor settings. In case of emergency, the arms will open automatically to allow free passage.

It support standard and handicapped type with wide passageway, wheelchair, pedestrian with large luggage can pass.

MAIN FUNCTION AND FEATURES

1. Stainless steel housing, rain-proof laser opening, novel and beautiful.

2. LINIX (the best micro-motor brand in China) brush-less DC motor is used and the surface is electroplated.

3. Length of arm: 500mm to 800mm.

4. Fault detection and alarm functions, easy to use and maintenance.

5. The running status can be programmed and controlled with the built-in keyboard on the main board.

6. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working

automatically within the prescribed time and reset again after the default delay (till fully reset).

7.Anti-breakthrough function. The gate is locked automatically until opening signal received.

8. Synchronization functions (for dual gate equipment).

9.Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),

the system will cancel the authority of the current user automatically.

10. Gate can be set as normally open or normally closed.

11. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Via dry contact signal)

12. Direction can be set as unidirectional or bidirectional.

13. The device can be connected to management computer to realize remote control and management.

14. LED direction indicator (optional)

15. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.

16. Support infrared photocell for anti-pinch and reset function.

TECHNICIAN SPECIFICATIONS