830mm Arm Swing Barrier Gate 40W IR Beam Auto Synchronized
Premium Building High Quality SUS304 Stainless Steel Automatic Pedestrian Barrier Gate
| Description |
Parameters |
| Lane Width |
530 to 830mm (single) |
| IP Rating |
IP54 |
| Pass Speed |
30 persons/min |
| Power Supply |
AC220V/110V, 50/60Hz |
| Drive Mode |
Motor drive |
| Max Power Consumption |
40W |
| Opening Time |
0.5S |
| Humidity |
≤90% coagulation free |
| Noise |
≤50dB |
| Service Life |
5,000,000 cycles |
| Outside Packing |
130x40x115cm |
| Working Environment |
-20°C~+60°C |
| Gross Weight |
85KGS |
General Description
The entire product features a premium SUS304 stainless steel plate construction with stamped forming. This intelligent swing gate easily integrates with various identification systems including IC card, ID card, barcode card, and fingerprint recognition equipment. It provides a civilized, orderly, and effective management solution for pedestrian access control. Widely applicable for stations, docks, subway systems, factories, buildings, smart residential areas, hotels, clubs, and enterprises requiring intelligent access management.
Available in single movement configuration for single and multi-channel applications, and dual movement configuration for multi-channel installations.
Product Dimension
Features & Functions
Compatible integration with various access control systems
Dry contact trigger opening with automatic timer-controlled closing
Dual dry contact control (NC for open, NO for close) for precise access timing
Bi-directional opening capability
Automatic free access during power failure with security resumption upon power restoration
Built-in safety clutch automatically disengages motor drive when obstructed
Optional safety IR beam for obstacle detection and automatic gate reversal
Customizable gate length to accommodate specific site requirements
Auto-synchronized opening for dual barrier installations
Self-locking motor mechanism at open and close positions