ADP191ACBZ-R7 Power Switch/Driver 1:1 P-Channel 500mA 4-WLCSP (0.76x0.76)
| TYPE | DESCRIPTION | 
| Category | Integrated Circuits (ICs) | 
| Power Management (PMIC) | |
| Power Distribution Switches, Load Drivers | |
| Mfr | Analog Devices Inc. | 
| Series | - | 
| Packaging | Tape & Reel (TR) | 
| Cut Tape (CT) | |
| Switch Type | General Purpose | 
| Number of Outputs | 1 | 
| Ratio - Input:Output | 1:01 | 
| Output Configuration | High Side | 
| Output Type | P-Channel | 
| Interface | On/Off | 
| Voltage - Load | 1.1V ~ 3.6V | 
| Voltage - Supply (Vcc/Vdd) | Not Required | 
| Current - Output (Max) | 500mA | 
| Rds On (Typ) | 80mOhm | 
| Input Type | Non-Inverting | 
| Features | Load Discharge, Slew Rate Controlled | 
| Fault Protection | - | 
| Operating Temperature | -40°C ~ 125°C (TJ) | 
| Mounting Type | Surface Mount | 
| Supplier Device Package | 4-WLCSP (0.76x0.76) | 
| Package / Case | 4-WFBGA, WLCSP | 
| Base Product Number | ADP191 | 
  Features of ADP191ACBZ-R7
  
  Low RDSON of 105 mΩ at 1.8 V
  Internal output discharge resistor (ADP191)
  Turn-on slew rate limiting (ADP191)
  Low input voltage range: 1.1 V to 3.6 V
  500 mA continuous operating current
  Built-in level shift for control logic that can be operated
  by 1.2 V logic
  Low 2 μA (maximum) ground current
  Ultralow shutdown current: <1 μA
  Ultrasmall 0.8 mm × 0.8 mm, 4-ball, 0.4 mm pitch WLCSP
   
  Applications of ADP191ACBZ-R7
  
  Microprocessor systemsAdministrator:
  Mobile phones
  Digital cameras and audio devices
  Portable and battery-powered equipmen
  Environmental & Export Classifications of ADP191ACBZ-R7
   
| ATTRIBUTE | DESCRIPTION | 
| RoHS Status | ROHS3 Compliant | 
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 
| REACH Status | REACH Unaffected | 
| ECCN | EAR99 | 
| HTSUS | 8542.39.0001 |