Model DT-PN868 Flat Surface Labeling Machine is specially built for high-volume continuous mass production scenarios. It can achieve high-speed and stable labeling at 100 pieces/min, equipped with a high-speed servo label feeding system and error and leakage prevention mechanism, no performance attenuation during long-term high-speed operation, can be seamlessly docked with high-speed production lines, and greatly improves mass production efficiency.

1. Peak labeling capacity up to 100 pieces/min, with a capacity increase of more than 2 times compared with low-speed equipment, greatly shortening the production cycle
2. High-speed servo label feeding system, fast response speed and accurate label feeding, no label flying, missing labels and duplicate labels during high-speed operation
3. Intelligent missing label detection and re-labeling function, the labeling qualification rate is stable above 99.8% under high-speed mass production
4. 150kg weighted rigid body, no resonance and jitter during high-speed operation, supporting 7*24 hours uninterrupted continuous mass production
5. 0-100 pieces/min stepless speed regulation, can accurately match the rhythm of front and rear high-speed production lines, no material jamming, no accumulation, no idling

1. Q: What is the maximum labeling speed of this labeling machine?
   A: The rated peak capacity can reach 100 pieces/min, supporting stepless speed regulation from 0 to 100 pieces/min.
2. Q: Will there be label flying, missing labels and duplicate labels during high-speed operation?
   A: Equipped with a high-speed servo label feeding system + intelligent error and leakage prevention mechanism, the labeling qualification rate is stable above 99.8% during high-speed operation.
3. Q: Can it run continuously at high speed for 24 hours without interruption?
   A: Yes. The weighted rigid body has no resonance, and the 0.8KW low-energy low-heat design supports 7*24 hours continuous high-speed mass production.
4. Q: Will the labeling accuracy be affected during high-speed operation?
   A: Stable labeling accuracy of ±1mm can be maintained in the full speed range, balancing mass production efficiency and labeling quality.
5. Q: How much is the capacity increased compared with conventional labeling equipment?
   A: The peak labeling speed of 100 pieces/min increases the capacity by more than 2 times compared with conventional low-speed equipment.
6. Q: Can it be docked with high-speed production lines?
   A: Yes. The stepless speed regulation can accurately match the rhythm of front and rear high-speed production lines to realize full-process linkage production.
7. Q: Can large-size labels and products also achieve high-speed labeling?
   A: Yes. Within the size range adapted by the equipment, all specifications can achieve high-speed and stable labeling without size restrictions.
8. Q: Will there be inaccurate label feeding during long-term high-speed operation?
   A: The servo label feeding system has no cumulative error, and can maintain accurate label feeding without offset and dislocation during long-term operation.
9. Q: Is the high-speed speed regulation operation complicated?
   A: Visual stepless speed regulation interface, the speed can be adjusted with simple operation, no complex debugging required.
10. Q: Is the energy consumption of high-speed operation very high?
    A: The total rated power of the machine is only 0.8KW, even at full speed operation, the energy consumption is extremely low, balancing mass production efficiency and energy saving.