Model DT-GS88 Compact In-Line Spindle Capping Machine is specially built for small workshops, studios and compact production lines with limited space. It adopts an in-line integrated compact layout with small floor space and high space utilization, does not occupy redundant production space, and can realize automated capping upgrade in a small site, while retaining the complete core performance.

1. In-line integrated compact layout, equipment size 30009801500mm, floor space of less than 3㎡, can be placed in a very small space
2. In-line horizontal layout, can be directly embedded into the existing filling production line without additional transformation of the production line, does not occupy redundant horizontal space
3. Integrated design of the whole machine, no exposed complex pipelines, neat placement, adapting to compact scenarios such as small workshops and studios
4. Optimized body center of gravity design, stable operation without shaking, no fixed installation required, can be used when placed on a flat ground
5. Movable casters can be installed at the bottom for flexible movement, and the placement position can be changed at any time according to the production line adjustment, adapting to flexible production layout
6. Wide range of container adaptation from 30mm to 300mm, adjustable capacity of 60-150 cycles/min, the compact body does not compromise the core capping performance

1. Q: What is the floor space of this equipment?A: It adopts an in-line compact design, with a floor space of less than 3㎡, which can be easily placed in a very small space.
2. Q: Can it be placed in a small studio or compact production line?A: Yes. In-line horizontal layout can be directly embedded into the existing filling production line without occupying redundant horizontal space, perfectly adapting to small workshops, studios and compact production lines.
3. Q: Can the equipment be moved flexibly?A: Yes. Movable casters can be installed at the bottom, which can be pushed and moved by a single person, and the placement position can be adjusted at any time according to the production line demand, adapting to flexible production layout.
4. Q: Will the compact body affect the capping performance?A: No. With integrated design, it retains the complete core performance of spindle capping, the capping qualification rate is stably ≥99% under rated working conditions, and the capacity is adjustable from 60-150 cycles/min.
5. Q: Does it need fixed installation?A: No fixed installation is required. It can be used when placed on a flat ground and connected to the power supply, and the position can be adjusted at any time to adapt to the flexible production line layout.
6. Q: Can it be directly docked with the existing filling machine?A: Yes. With in-line standard docking structure, it can be directly embedded into the existing filling production line without additional transformation of the production line, convenient docking.
7. Q: Is daily operation and maintenance convenient?A: Yes. Full operation and maintenance space is reserved on the front of the body, no need to reserve side maintenance space, further saving site space.
8. Q: Is the operating noise of the equipment high?A: No. The compact body has been optimized for sound insulation, with low operating noise, adapting to small studios and non-industrial scenarios.
9. Q: What is the net weight of the equipment? Is it stable when placed?A: The whole machine has an optimized center of gravity design, stable placement without shaking during operation, and no displacement problem even without fixed installation.
10. Q: What is the power supply requirement of the equipment?A: It adopts AC220V conventional mains supply, which can be connected and used with ordinary power supply without additional wiring.