Model DT-6500 Double-Side Labeling Machine is specially built for high-volume continuous mass production scenarios. It is equipped with a dual-servo high-speed synchronous labeling system, which can achieve a peak capacity of 120 bottles/min, with fast and delay-free synchronous response of dual labels, no missing labels or wrong labeling during long-term high-speed operation, stable performance without attenuation, and is an efficient labeling solution for large-scale mass production scenarios.

1. Peak labeling capacity up to 120 bottles/min, wide stepless speed regulation of 30-120 bottles/min, with a capacity increase of more than 2 times compared with conventional low-speed equipment
2. Dual labeling heads high-speed servo synchronization system, precise linkage between bottle conveying and dual label feeding, no missing labels, duplicate labels or alignment deviation during high-speed operation, and the labeling qualification rate is stable above 99.8%
3. Compatible with large-size label reels with a maximum of 350mm outer diameter, reducing reel change downtime by more than 60%, further improving continuous mass production efficiency
4. 175kg weighted rigid body, no resonance and jitter during high-speed operation, supporting 7*24 hours uninterrupted continuous mass production without performance attenuation
5. Intelligent rhythm matching design, can accurately dock with front and rear high-speed production lines, no bottle jamming, no accumulation, no idling, realizing full-process high-speed linkage production

1. Q: What is the maximum double-side labeling speed of this equipment?A: The rated peak capacity can reach 120 bottles/min, supporting stepless speed regulation from 30 to 120 bottles/min, which can be flexibly adjusted as needed.
2. Q: Will there be misalignment of double-side labeling during high-speed operation?A: Equipped with a dual labeling heads high-speed servo synchronization system, precise linkage between bottle conveying and dual label feeding, ensuring precise alignment of double-side labeling without dislocation during high-speed operation.
3. Q: Can it run continuously at high speed for 24 hours without interruption?A: Yes. The 175kg weighted rigid body has no resonance jitter, low-loss structure design, supporting 7*24 hours uninterrupted continuous mass production.
4. Q: Will the labeling accuracy be affected during high-speed operation?A: Stable labeling accuracy of ±1mm can be maintained in the full speed range of 30-120 bottles/min, balancing mass production efficiency and labeling quality.
5. Q: How much reel change time can be reduced by large-size label reels?A: It supports label reels with a maximum outer diameter of 350mm. Compared with conventional small reels, the reel change frequency is reduced by more than 60%, greatly reducing downtime.
6. Q: How much is the capacity increased compared with conventional double-side labeling equipment?A: The peak labeling speed of 120 bottles/min increases the capacity by more than 2 times compared with conventional low-speed equipment, greatly shortening the production cycle.
7. Q: Can it be docked with high-speed production lines?A: Yes. The intelligent rhythm matching design can accurately dock with front and rear high-speed bottle unscramblers, filling machines and other equipment to realize full-process high-speed linkage production.
8. Q: Will there be inaccurate label feeding during long-term high-speed operation?A: The servo synchronous label feeding system has no cumulative error, and can maintain accurate dual label feeding without offset and dislocation during long-term operation.
9. Q: Is the high-speed speed regulation operation complicated?A: Visual stepless speed regulation interface, the speed can be adjusted with simple operation, no complex debugging required.
10. Q: Can defective products with missing labels be detected during mass production?A: Standard equipped with intelligent missing label detection function, which can monitor the double-side labeling status in real time, give timely warning and reject defective products, and eliminate the outflow of defective products.