Features:

1: Paper Feeding Unit

1) The enlarged paper feeding head (Feeder head) has 9 suction nozzles applicable for paper in different thicknesses and 5 paper feeding nozzles which can be independently adjusted for parallel paper feeding. It also has 4 paper lifting nozzles which can move up and down in a large stroke. The large power wind pump provides a high suction force. It can be conveniently adjusted; paper can be divided reliable, and it runs fast and stably.

2) The professional designed feeder is made of lightweight aluminum alloy with anode treatment on the surface.The forward,backward,high and low positions can be adjusted according to the stock:for smooth feeding of thin paper,arge gram cardboard,corrugated paper,etc.

3) Adjustable air suction tube, suction head and air distribution valve superhard alloy treatment.

4) Horizontal paper parting and blowing device.

5) The main and secondary stacking paper table does not stop alternately, and feeder does not stop operation.

6) The pre-stack device is equipped with rails so that the operator can accurately and easily load the stack into the feeder.

7) Pneumatic lifting device for feeding frame.

2: Paper Conveying Unit

1) The paper conveying part is made of stainless steel plate to prevent rust and provide stable and correct paper conveying.

2) Paper is positioned by a pushing unit and a pulling unit which can be shifted conveniently for different specifications of paper.

3) Side gauge, front gauge paper photoelectric detection.

3: Die-cutting Unit

1) This machine is upgraded to a brand high level by the automatic pressure regulation and automatic front scale regulation. The addition of this function upgrades it into a convenient and favorable digital device with high controlling speed.

2) The oil route is forcibly lubricated by a oil pump as made in Taiwan to reduce wearing, an oil cooler is added to cool the lubricating oil, and the main chain is lubricated timely to improve the operation efficiency.

3) The novel transmission mechanism provides high speed die-cutting, and the highly precise swing link platform improves the padding speed (almost without padding), as it is known the pressure can be hardly balanced in most of other common machines.

4) The pneumatic plate locking unit can fix the upper frame more firmly and faster. In our die-cutting machine, the front, back, left and right are pneumatically locked simultaneously to realize a high correctness and a high speed. However, common machines are tightened by screws.

4: Paper Stripping Unit

1) By the one-time stripping system,all extraneous scraps of paper and scrap (except the held margins) can be stripped in die-cutting.

2) The up, down and middle die cam three-link transmission system is stable, harmonious, and correct for high power and fast loading, unloading and calibrating.

3) The stripping frame is pneumatically lifted with a centering unit, and it can be operated easily to shorten the preparation time.

4) The pre-installed platform is equipped with a centering unit to facilitate the mounting of stripping plate.

5) The stripping process is reasonably designed to eliminate the defect of low speed and plate deviating during stripping.

Technical Parameters:

Workshop: