Automotive 2K White Paint is a professional acrylic resin based coating developed for automotive refinishing workshops and industrial paint applications. The formulation combines synthetic resin pigments and organic solvents to produce a clean bright white finish with stable coverage and dependable curing performance. When mixed with the appropriate hardener the coating forms a durable paint film suitable for repair painting on vehicles machinery panels and metal components.

This product is designed for spray application and works well on primed metal factory coatings or properly sanded surfaces making it a reliable choice for collision repair and repainting operations.

Stable Pure White Appearance
Formulated with high quality pigments to deliver a consistent and bright white finish.

Reliable 2K Curing System
Two component system creates a strong coating film with good durability.

Fast Surface Drying
Surface dry within 5 to 15 minutes at 20°C allowing efficient workshop workflow.

Smooth Spray Application
Optimized viscosity suitable for spray gun application and uniform coverage.

Compatible With Standard 2K Thinners
Can be adjusted using common automotive 2K thinner depending on spraying conditions.

• Automotive body repair painting

• Vehicle panel refinishing

• Workshop repainting projects

• Machinery and equipment coating

• Metal surfaces with primer layer

Can this 2K white paint be used on bare metal?
It is recommended to apply on primed metal surfaces rather than bare metal for better adhesion.

What thinner should be used for spraying?
Standard automotive 2K thinner can be used depending on spray conditions.

Is the hardener included in the package?
The hardener is sold separately and must be mixed at a 2 to 1 ratio.

How long before sanding or polishing?
After full curing typically 10 hours at 20°C the surface can be further processed.

Is it suitable for complete vehicle repainting?
Yes it can be used for both panel repair and full vehicle refinishing when applied correctly.

• Ensure surface is clean dry and sanded before application

• Maintain recommended mixing ratio to ensure proper curing

• Use appropriate spray pressure for even coating

• Store product between 5 and 25°C in sealed containers