Acrylic polyurethane clear coat is widely used in automotive refinishing where gloss retention, durability, and smooth film formation are required. SW990 High Gloss Clear Coat is a two component coating designed for professional vehicle paint repair.

After curing, the coating forms a transparent protective layer that enhances the depth and brightness of the base color. It can be applied over single stage basecoat systems and allows efficient polishing during finishing operations.

This product is commonly supplied to body repair shops, paint distributors, and automotive refinishing suppliers who require stable performance and consistent application behavior.

The coating produces a bright and transparent surface layer that improves the visual depth of the base color while delivering a clean reflective appearance.

Balanced viscosity and solvent system allow the paint to level evenly during spraying, helping reduce orange peel and improving surface uniformity.

The cured film provides resistance to fuel exposure, cleaning chemicals, and environmental contaminants encountered during vehicle operation.

The acrylic polyurethane resin system maintains gloss and clarity over time, reducing yellowing and surface dulling.

SW990 clear coat is widely used in:

• Automotive collision repair workshops
• Car refinishing service centers
• Vehicle restoration projects
• Commercial fleet repainting
• Automotive paint distributors supplying body shops

It can be applied over two stage basecoat systems or properly prepared old paint surfaces.

Spray Gun:
Nozzle Size: 1.3 to 1.4 mm

HVLP Spray Gun
Pressure at Air Cap: 0.7 bar

RP Spray Gun
Pressure: 1.8 to 2.0 bar

Apply two coats with a flash off interval of 5 to 15 minutes.

Different hardeners can be selected according to ambient temperature:

Fast Hardener SW990-01
Recommended for temperatures below 15°C

Standard Hardener SW990-02
Recommended for temperatures between 15°C and 25°C

Slow Hardener SW990-03
Recommended for temperatures above 25°C

Yes. SW990 is designed to be applied over properly dried basecoat systems.

Normally two coats are recommended to achieve proper film thickness and gloss.

Yes. After curing, the film can be polished to improve surface smoothness.

Oven drying is optional. The product can air dry at room temperature or be force dried at 60°C.

Yes. Bulk packaging and private label services are available for distributors and importers.

Unopened cans can be stored at room temperature for up to:

Clear Coat: 3 years
Hardener: 2 years

Keep containers sealed and away from heat or open flame.