G3 FLEXICUT abrasive compound is a professional automotive rubbing compound designed for the first stage of paint correction and refinishing work. This product is widely used in body shops, detailing centers, and automotive refinishing workshops to remove sanding marks, oxidation, and surface defects before polishing and finishing. It works effectively on modern automotive clear coats as well as traditional paint systems, making it suitable for both repair and restoration applications.

The compound can be applied by machine polishing or hand polishing, offering flexibility for different repair environments and technician preferences.

Efficient Defect Removal
Removes P1500 sanding marks, oxidation, haze, and minor scratches quickly, reducing polishing time.

Balanced Cutting Performance
Provides strong cutting ability while still maintaining a controlled finish, making the next polishing step easier.

Silicone Free Formula
Safe for repainting environments and will not contaminate surfaces before painting or coating.

Machine and Hand Application
Compatible with wool pads, foam pads, and hand application depending on repair requirements.

Suitable for Modern Clear Coats
Works on 2K clear coat systems, refinished panels, and OEM paint surfaces.

This rubbing compound is commonly used in the following industries and applications:

• Automotive body repair workshops
• Car detailing and paint correction centers
• Automotive refinishing and repainting shops
• Used car refurbishment and restoration
• Industrial painted surface restoration
• Marine paint surface correction

It is typically used as Stage 1 cutting compound before polishing and waxing processes.

Q1: What sanding marks can this compound remove?
This compound can remove P1500 and finer sanding scratches on automotive paint surfaces.

Q2: Can it be used on fresh paint?
Yes, it can be used on fully cured refinish paint and clear coat surfaces.

Q3: Is this product silicone free?
Yes, the formula does not contain silicone and is safe for repainting environments.

Q4: Can I use this compound by hand?
Yes, it can be applied by hand or by polishing machine depending on the repair area.

Q5: What should be used after this compound?
After using this cutting compound, a polishing compound and finishing polish are recommended to achieve high gloss.

For best results, use the compound with a wool polishing pad for higher cutting performance. Keep the polishing surface slightly damp or use a small amount of water during polishing to extend working time and reduce dust. Always clean the surface before moving to the polishing stage to ensure a smooth finish.

Store the product in a cool and dry environment and keep the container sealed after use to prevent drying.