PRO Audio Dynamic Speaker Audio Processor DSP-260 Features Stereo Feedback Suppressor 2 × 12 group fast tracking notch filter
dual 28-band graphic equalizer
classic compressor
120A sub-harmonic synthesizer
2 × 3,2 × 4,2 × 5,2 × 6 crossover format available
stereo multi-band parametric equalizer
stereo output limiter
speaker trimming delay
pink noise generator
Auto-EQ automatic room equalization compensation
25 factory preset / 25 user setting program memory
2 input, 6-output
RTA-M real-time spectrum analyzer is located in the panel microphone inputs with phantom power
24-Bit A / D converter provides a dynamic range of greater than 110dB
Patent Type IVTMA / D converter circuit
LCD display
Technical Parameters | Analog Input: Enter Quantity | (1 group) RTA microphone input |
| Line Input | 2 groups |
| Type | Electronically balanced / RF filtering, XLR female |
| Impedance | > 40kΩ |
| Maximum input level | +20 dBu |
| CMRR | > 45dB |
| RTA microphone phantom power | +15 VDC |
| RTA Microphone Equivalent Input Noise | <-110dBu, 22Hz,-22kHz, 150Ω |
Analog output: | outputs | (6 groups) Line Output |
| Type | Electronically balanced / RF filtering, XLR Male |
| Impedance | 120Ω |
| Maximum Output Level | +20 dBu |
| characteristics | A / D |
| Category | Type Iv Conversion |
| Dynamic range | 110dB A-weighted, 107dB without weighted |
| Type IV dynamic range | 123dB, with transient signals, A-weighted, 22kHz BW |
| 121dB, with transient signal, no weighting, 22kHz BW |
| 115dB, with the program signal, A-weighted, 22kHz BW |
| Sampling Frequency | 48kHz |
| Dynamic range | 112dB A-weighted, 110dB without weighting |
System features: | Dynamic range | > 110dB non-weighted,> 107dB A-weighted |
| THD + Noise | 0.002%, +4 dBu, 1kHz, 0dB input gain |
| Frequency Response | 20Hz-20kHz, ± 0.5dB |
| Channel Crosstalk | <-110dB, 120dB general |
| Input to Output Crosstalk | <-110dB |
| Delay | Each output channel 10ms (of 60ms) |
Detailed Pictures
