33dBm Outdoor Selective band Signal Booster LTE 900/1800/2100MHz 4G Wideband Signal Amplifier for Rural Area
The digital Repeater is designed to provide a more cost-effective solution than adding a new Base Transceiver Station (BTS) to improve signal coverage and communication quality in single system. Its easy installation and maintenance helps carriers achieve fast return on investment.
The device functions as a relay between the BTS and mobile devices. It receives low-power signals from BTS via the Donor Antenna, linearly amplifies the signal, and retransmits it via the Coverage Antenna to weak or blind coverage areas. Mobile signals are also amplified and retransmitted to the BTS in the opposite direction.
| SPECIFICATIONS | PARAMETERS |
|---|---|
| Frequency Range |
900MHz | UL890-910MHz, DL935-955MHz 1800MHz | UL1745-1765MHz, DL1840-1860MHz 2100MHz | UL1920-1935MHz, DL2110-2125MHz 2100MHz | UL1935-1950MHz, DL2125-2140MHz |
| Bandwidth |
900MHz | supports 1 subband from 0.2 to 20 MHz adjusted 1800MHz | supports 1 subband from 0.2 to 20 MHz adjusted 2100MHz | supports 2 subband from 0.2 to 15 MHz adjusted |
| RF Carriers ARFCN Filtering | Digital |
| Gain | UL: 75±3 dB DL: 80±3dB |
| Output Power | UL: 20±2dBm DL: 33±2dBm |
| Automatic Gain Control | 30dB/1dB |
| Minimum Input power | ≥ -90dBm |
| Gain Flatness / PB Ripple | < 4dB |
| Automatic Level Control | ≥ 25dB |
| Unwanted emissions | Fully comply with 3GPP 36.106 |
| EVM | ≤8 |
| VSWR | ≤1.8 |
| Noise Figure | ≤8dB |
| Delay | ≤10μs |
| RF Connector | N-Type (Female) - Customers to Choose |
| Storage temperature range | -40°C to +85°C |
| Operating Temperature | -25°C to +55°C |
| Power Supply | 195-265 VAC |
| Power consumption | ≤100W |
| Barometric pressure | 55 kPa -106 kPa |
| Environment Conditions | IP65 |
| Relative humidity | 5% - 95% |
| Weight | ≤20kg |
| Size | 596 x 400 x 203.5 mm |