Simplex / Duplex FC UPC Fiber Connector Fast Installation / Fiber Optic Fast Connectors

Fiber optic adapters (also known as bulkheads) are used to join two fiber optic patch cables together.
1. Description
- Quick connector with other on-site comparison
This product is embedded in optical fiber, to ensure a controlled factory ceramic polishing face, the radius of
curvature, apex offset, optical fiber end surface polishing projection height, and the ceramic mass
The use of high concentricity of the ceramic ferrule embedded fiber ensures a low insertion loss and high return loss
optical performance accuracy of the V-groove to be cut on-site slide locking mechanism fixed to the fibers have the
V-groove of the fiber core center the combination of precise fiber core with matching refractive index matching cream
can guarantee quick connectors with high stability and high performance bare fiber, coating, pigtails, skin quadruple
cable clamp, special assembly fixtures to meet the requirements, the operator simple and quick.
2. Characteristics
Head comparison with conventional hot melt
1) Low equipment cost and the cost
2) Installation is fast
3) High reliability and stability
3. Optical Characteristics
| G.652 | G.655 | 50/125μm | 62.5/125μm |
Attenuation | @850nm | | | ≤3.0 dB/km | ≤3.0 dB/km |
(+20°C) | @1300nm | | | ≤1.0 dB/km | ≤1.0 dB/km |
| @1310nm | ≤0.36 dB/km | ≤0.40 dB/km | | |
| @1550nm | ≤0.22 dB/km | ≤0.23dB/km | | |
Bandwidth (Class A) | @850nm | | | ≥500 MHz·km | ≥200 MHz·km |
@1300nm | | | ≥1000 MHz·km | ≥600 MHz·km |
Application:
. CATV
. Telecommunication networks
. Test equipment
. Local Area Networks(LANs)
. Data processing networks