| Frequency | 1000Mhz |
| Output Power(dBm) | 100W(50dBm) |
| In-band group delay | ≤1us |
| Gain | 45±1.0,45±1.0 (external input 6dbm, power amplifier output 50dbm) |
| In-band fluctuation (dB) | ≤2.5 (peak-to-peak value) |
| Input voltage standing wave ratio | ≤1.35 |
| Output voltage standing wave ratio | ≤1.3 |
| Supply voltage Typical | +30Vdc Range: 24-36V |
| Supply current | +30Vdc@100W≤5.5A |
| Output RF connector | N-50KFD |
| Size | 170×94×26.5mm (excluding connectors) |
| Input signal source | Built-in high-efficiency modulation sweep signal source, which can also be connected to external sources |
| 1 7W2 male socket 2 Feedthrough capacitors (from top to bottom) | 1: A1 is the 30V power input, and A2 is GND; 2: The first pin of 7W2 is the PA_SW power amplifier enable; 3: The upper through-core capacitor is SRC_SW (internal signal source switch), high-on, low-off; 4: The feedthrough capacitor below is PS_SW (internal and external source switch), high: external source; low: built-in source; |


| Quantity(PCS) | <100pcs | <500 | 500-1000 | >1000 |
| Lead time(Days) | 3 | 3-5 | 7-12 | To be negotiated |
| Item | Logo | Frequency | Power | Packing |
| MOQ(PCS) | 1 | 1 | 1 | 1 |
Company profile

| Selling Units: | Single item |
| Single package size: | 20X10X5 cm |
| Single gross weight: | 0.2kg |
| Package Type: | Each piece is individually packed into a bag and then packed into a carton. |