Grey PE Acp Paneling Aluminum Composite Panels For Building Exterior Walls And Interior Wall Paneling 4MM 1.22 X 2.44m
It is a sandwich panel consisting of:
Two Thin Aluminum Sheets (typically 0.2mm to 0.5mm thick) coated with a protective paint layer (PVDF or Polyester).
A Core of Polyethylene (PE) Plastic (typically 3mm thick), which is a highly combustible hydrocarbon.

1.Constructional exterior curtain walls;
2.Decorative renovation for store-added old buildings;
3.Indoors decoration for interior walls, ceilings, bathrooms, kitchens and balconies;
4.Gallaies,exhibition,saloons,stores,offices,banks,hotels,restaurants and apartments;
5.Advertisement board, display platforms and signboards;
6.Raw materials in industrial purpose;
7.Materials used for vehicle and boat.


Specifications And Sizes
| Specifications and Sizes | |
| Aluminum Skin Thickness: | 0.03mm-0.50mm |
| Total Panel Thickness: | 2mm-6mm |
| Width: | 1000mm, 1220mm (regular), 1250mm, 1300mm, 1500mm, 1550mm, 1575mm, (maximum) |
| Length: | Up to 5800mm |
| Standard Size: | 1220mm (width)×2440mm (length) |
| Production Capability: | 100,000sqm / month |
| Inner core | ( Normal non toxic polyethylene, one side unbroken polyethylene, two side unbroken polyethylene, virgin LDPE, ) B1 non-combustible mineral filled core,A2 non-combustible mineral filled core |
| Non-standard sizes and special colors are available depending on customers' offers | |
Our Main Related Products

Packaging:

Shipping

Thank you very much for viewing this page Sincerely look forward to our cooperation!