Air Suspension Spring For Panamera 970 97034305215 Air Spring Repair Kit 97034305115

Description: Air Suspension Spring For Panamera 970 97034305215 Air Spring Repair Kit 97034305115

Model: For Panamera 970 97034305215 97034305208 97034305209 97034305219 97034315201


OEM:
(L) 97034305115 97034305108 97034305109 97034305119 97034315101 97034305117 97034305118
(R) 97034305215 97034305208 97034305209 97034305219 97034315201 97034305217 97034305218

Other Part Number: Air Suspension, Air Spring, Air Bellow, Air Shock, Air Strut, Air Shock Absorber, For Porsche Panamera, Air Suspension for Panamera, Panamera 970, Air Suspension Spring, Air Suspension Repair Kit

Condition: New

Material: Rubber Steel Aluminum

Application: Porsche Panamera 970 2009- 97034305215 97034305208 97034305209 97034305219

Warranty: 12 months

Delivery: 3-7 days after receiving payment

Gross Weight: 5kg

Detailed images





Notes

This front right air spring 97034315203 for the Porsche Panamera 970 is manufactured in accordance with the quality management ISO / TS 16949: 2009.
Repairing the strut makes sense only if the shock absorber still has a sufficient efficiency.
This repair kit should not be used for oil end shock absorbers. In this case, we cannot give a two-year warranty.
If the air strut is broken, but the shock absorber still has the best properties, you can use this set to restore the function of the complete shock absorber.
It can be installed in the following vehicles:
Porsche Panamera 970 (G1) 2009 - 2013
Suitable air spring for shock absorbing strut with the following oringinal spare part numbers:
97034315203, 97034315200, 97034315201, 97034315202,
97034305207, 97034305208, 97034305209, 97034305210, 97034305211, 97034305212, 97034305214,
97034305215, 97034305216, 97034305217, 97034305218, 97034305220, 97034305221, 97034305222, 97034305223
WARNING!
The vehicle suspension system is based on a combination of electronic level control and nitrogen 5 or CO2 filled air springs.
After replacement of any spare parts, such as compressor, air spring, valve and / or strut, the output pressure in the system MUST have 17 bar.
A compressor can only partially compensate for the pressure difference.
You MUST follow the appropriate car manufacturer's installation instructions.
If the appropriate car manufacturer's installation instructions and specifications are not followed correctly, your system will continue to show errors or will malfunction.
If our parts are damaged in the process if will void any warranty or guarantee.
Normally the complete emptying of the system is required under car manufacturer's installation instructions .
After replacement of the corresponding spare part, the system MUST be recharged with CO2 or nitrogen 5 in accordance with the requirements of the car manufacturer.
This can only be done with appropriate software and appropriate special tools.
After this procedure, you can start further steps, such as calibration of the vehicle's suspension leveling control system.