Regarding outdoor portable air conditioners, we adopt an all - in - one production model. Everything from independent design, production of condensers, evaporators and sheet metal parts, finished product assembly to testing is completed independently by ourselves.
Product Parameter
serial no. | specification | technical paramter | technical paramter | technical paramter |
1 | Model | KY-58 | KY-68 | KY-79 |
2 | Rated Cooling Capacity(W/BTU) | 5800 W / 19790 BTU | 6800 W / 23200 BTU | 7900 W / 27000 BTU |
3 | Energy Efficiency Ratio (W/W) | 2.58 | 2.72 | 3.0 |
4 | Rated Voltage(V) | 220 | 220 | 220 |
5 | Rated Frequency(Hz) | 50 | 50 | 50 |
6 | Rated Cooling Power(W) | 2250 | 2500 | 2625 |
7 | Rated Cooling Current (A) | 10.4 | 11.6 | 12.2 |
8 | Maximum Input Power(W) | 3480 | 3880 | 4070 |
9 | Maximum Input Current(A) | 15.8 | 17.6 | 18.5 |
10 | Allowable Pressure of Refrigeration system(MPa) | 4.2 | 4.2 | 3.0 |
11 | Refrigerant and Charge Amount | R410A:1150g | R410A:1400g | R410A:1400g |
12 | Circulating Air Volume(m³) | 1200 | 1200 | 1200 |
13 | Noíse dB(A) | 57 | 57 | 57 |
14 | Protection Category against Electric Shock | I | I | I |
15 | Waterproof Grade | IPx4 | IPx4 | IPx4 |
16 | N.W. (kg) | 90 | 92 | 98 |
17 | Unit Size | 606*558*1296 mm | 606*558*1296 mm | 606*558*1296 mm |
Principle of the non-drainage function:
During the operation of the unit, the evaporator absorbs the heat and moisture in the air, and the moisture condenses on the fins of the evaporator, flowing downstream to the water receiving tray and then to the bottom of the condenser. The condensed water is splashed onto the fins of the condenser and evaporated by the fan blade, and then blown into the air by the condensing fan. The amount of condensation evaporation is greater than the amount of evaporation condensation, so that the water in the water receiving tray will never accumulate too much.
Due to the cooling effect of water, the condenser has a lower condensing temperature, resulting in a significant improvement in system efficiency.
If a certain required quantity is reached, the product's performance and appearance can be customized according to the local market demands of customers, so as to gain a better edge in seizing market opportunities.