Starlight level 1080p monitoring camera ceiling installation with 24V wide voltage

Note : When using the headlights press the dual flashing lights to trigger the main unit turn off the dual flashing lights at any time and the monitoring system enters basic mode .
Description of surveillance footage
(1) Startup of surveillance video : When the car starts the recording system automatically records and saves in a loop . The recording format is AVI and each video segment is 3 minutes long .
After parking when the vehicle is hit by external forces and vibrates the vibration sensor installed in the car immediately triggers the monitoring system host to work quickly recording real - time high - definition monitoring footage and recording the real - time on - site situation of the car being hit.
Video files can be played online or inserted onto a computer by unplugging them .

The recording screen is in a " field " shaped four screen mode to meet the recording needs of the camera images in four directions . Real time information is overlaid in the upper left corner to grasp the specific recording time at the time of the incident .
(2) Description of monitoring and recording buttons

(3) Monitoring and recording button
SD - SD card supports a maximum capacity of 32GB
Playback - (long press) to enter/exit playback mode
Delete - (long press) In playback mode you can delete the current video file
Time - (Long press) In the vehicle monitoring status the time can be set . If you continue to long press the [Delete] button you can set the year month day hour minute and second separately

Start - In playback mode press the [Start] button to start playing the current recording file
In the vehicle monitoring (not recorded) state, press the [Start] button to start recording
Stop - In recording mode press the [Stop] button to stop playing
In the vehicle monitoring (recording) state press the [Stop] button to stop recording
◀ — In playback mode press【 ◀】 Key select the previous recording file
In the time setting state press【 ◀】 Key time set value reduced by "1"
▶ — In playback mode press【 ▶】 Key select the next recording file
In the time setting state press【 ▶】 Key increase the time setting value by "l"