Slim Speed Gate Turnstile Access Management Automatic Swing Gates With Face Recognition
Swing turnstile is a high-tech product which mainly provides intelligent management to passageway.It can carry out intelligent control and management to the passageway that can be achieved by configuring various identification equipment and adopting fair,reliable security protection,alarming equipment and direction indicating equipment.This product suitable for high-level neighborhoods,intelligent buildings,hotel,subway,port and club,etc.
Features&Functions
- The housing material is 304 stainless steel, it is very durable.
- Break-in alarm. Trailing alarm.When reverse entry occurs,the gate closes automatically.
- Anti-pinch function, infrared induction anti-pinch function.
- With standard fire alarm input interface, the device will unconditionally open first after receiving the fire alarm signal.
- Gate opening and closing time is 0.8~3s.Time required to enter the traffic state after power-on is 3s.
- Anti-collision movement, clutch lock, quiet and efficient.
- The motor type is sensor motor.Use the numerical control encoder to limit, accurate, efficient and low failure rate.
- With a zero-bit self-inspection function, easy for users to maintain and use.
- Remote control and management can be realized through the management computer directly.
Extend functions
- Nonstandard program cunstomized.
- LED counting function.
- Secondly opening function to meet for ticket system and anti-passback project.
- Voice&light prompt function
- Voice&light alarm function
- Normally open or closed can be adjust to meet the requirements of the different place.
Technical Parameters
| Size: | L1200*W180*H1000 mm |
| Motor type: | Brushless motor |
| Main board type: | V2.6 |
| Normal running life: | ≧8 million times |
| Sensor quantity: | 6 pairs |
| Pass speed: | 30 person/min |
| Housing material: | 304 stainless steel&Stoving varnish |
| Passage width: | 500-1000MM |
| Swing arm material: | Acrylic/Tempered glass/Stainless steel pipe(optional) |
| Input interface: | AC100-240V,50/60HZ |
| Working voltage: | DC24V |
| Working power: | 60W |
| Working temperature: | -15℃-70℃ |
| Working humidity: | 5%-90% |
| Working environment: | Indoor/Semi-outdoor(with shade) |
| Input interface: | Relay dry contact signal or 12V pulse signal with pulse width ≥100ms, drive current ≥10mA |
Packaging
