Double-sided sanding machine, double-sided grinding machine

I. The characteristics of machine tools:
This machine adopts a digital keyboard for free lifting, and each group of sanding frames can be raised and lowered electrically; each group of sanding frames can manually adjust the rotation speed; the conveyor belt table can be raised and lowered freely from 0 to 100 mm; each group of sanding frames vibrates left and right, and the vibration amplitude can be adjusted in three stages, and the vibration travel uses linear guide rail sliding, not the traditional cylindrical slide block, with higher precision; each group of sanding frames are removable, convenient for changing sandpaper, with 12 small brush plates on the first, second, and third groups. It can basically achieve no blind spots, each brush plate is fixed with a quick connector, can be taken down by hand, very convenient to change the sand belt; the fourth group transmission uses a synchronous aluminum belt wheel transmission, all connecting motors are selected with worm gear reducers for sanding, and the fourth, fifth, and sixth groups of brush rolls are driven in a direct connection, which makes the whole machine more synchronous.

1. The shortest processing length is 450mm
2. Processing Thickness 2.5mm-120mm
3. The motor power of the first sand frame is 15kwX2.
4. The motor power of the second sand frame is 15KWX2
5. Conveyor belt motor power 1.5kwX2
6. Lift motor power 0.37kwX2
7. Sanding belt size 650x1950mm
8. First sand frame line speed 18m/s
9. Second sand frame line speed 18m/s
10. Working pressure 0.6MPa
11. Weight 3500kg
12. Suction air volume: 7500m3/h
13. Transmission speed Variable frequency speed control
14. Overall dimensions: 1800X1300X2100